Shandong Huiyao Laser Technology Co., Ltd

The   laser marking machine   uses a laser beam to make permanent marks on the surface of various materials. The effect of marking is to expose the deep material through the evaporation of the surface material, thereby engraving exquisite patterns, trademarks and text.                                 Desktop laser marking machine   The basic principle of laser marking is to use a high-energy laser beam to irradiate the surface of the object, and the light energy is instantly converted into heat energy, so that the surface of the object quickly evaporates, exposing the deep layer of material, or the light energy causes the chemical and physical changes of the surface material to engrave. Traces, or use light energy to burn off part of the material, so as to engrave any required text and graphics on the surface of the object, which can be used as a permanent anti-counterfeiting mark.   The ...

How does laser engraving work? Laser etching, laser marking , and laser engraving are all applications that can be met by industrial laser cutting machines. The capabilities and features of laser machines vary widely: there are CO 2 laser engravers that primarily emit low-power laser beams that fit comfortably on your desk, and high-powered fiber lasers designed specifically to facilitate high- - volume laser marking and engraving applications in industrial environments. Different lasers vary depending on the specific chemical they are used to produce the laser beam. In general, all laser cutting machines have three common components: the laser itself, the laser's control system, and the marking surface. The machine operator uses a software program to modify the settings of the laser cutting machine, including the power output of the laser and the speed of the controller that guides the laser across the surface of the material. These settings can be used to change the laser cutter ...

  Laser Welding Machine After booting up, the self-check of the device is successful, but the laser light is not lit 1. Restart and let the device self-check. If successful, it can be used normally. 2. If the laser light does not turn on after restarting, check whether the laser light needs to be replaced. The device starts up and self-checks normally, and the laser light is turned on. When the light is emitted, the "xenon lamp is off" and the "xenon lamp 1 or 2" premonition failure prompt appears 1. Restart the device, if normal, it can be used. 2. After the welding machine is started, if this alarm occurs during use, consider the degree of lamp tube aging or the degree of lamp tube breakage, check and replace the xenon lamp. 3. After the welding machine is started, this alarm often appears during the use process. It does not improve after restarting. Check whether the charging box and the discharge box line joints are loose. , The joint will become burnt color). N...

After the laser welding machine has been used for a period of time, there are some minor faults that cause the equipment to not be used normally. In order to reduce the waiting cost for customers.  Laser Welding Machine Factory   has compiled its own experience and judgment methods into eight points for your reference. When the device is turned on, a "system failure" and "cooling system abnormality" prompt message appears during the self-checking process of the device 1. Check whether the chiller is normal. 2. Check whether the connecting wire between the chiller and the welding machine is correct. Laser Welding Machine